Start with the right product and a clean surface
A streak-free finish on stainless steel starts with two things: a cleaner made for the surface and a surface that is free of loose dust and grit. Koala Eco Stainless Cleaner is a 16.9 oz peppermint-scented polish designed for stainless steel in the kitchen, bath, and laundry area. It uses essential oils and contains no synthetic fragrance, so you get a fresh mint scent without added synthetic perfume.
Before you spray, wipe down the surface with a soft, damp cloth to remove crumbs, splashes, and dust. This step prevents you from grinding debris into the finish and helps the cleaner work evenly. If your appliance has a visible grain, note its direction—working with the grain will help you avoid streaks and swirl marks.
How to use Stainless Cleaner for a streak-free shine
Follow these steps for appliances such as refrigerators, dishwashers, and range hoods. The same approach works for stainless steel sinks and laundry appliances.
- Shake and spray: Shake the bottle well, then spray a light, even mist onto a soft microfiber cloth—not directly onto the appliance. This gives you more control and prevents overspray from drying unevenly.
- Wipe with the grain: Wipe the cloth across the surface in the direction of the stainless steel grain. Use overlapping passes and moderate pressure. For vertical grain, wipe up and down; for horizontal grain, wipe side to side.
- Buff to a finish: Turn to a clean, dry section of the cloth and buff the surface lightly. Buffing removes any remaining residue and brings up the shine. If you see streaks, they often come from using too much product or from a cloth that is too wet—buff again with a dry cloth.
- Repeat for stubborn areas: For fingerprint marks or smudges, a second light application on a fresh cloth is usually enough. Avoid scrubbing hard; let the cleaner do the work.
Tackling fingerprint marks on stainless steel
Fingerprints show up easily on stainless steel because the oils from your skin sit on top of the finish. The peppermint formula in Koala Eco Stainless Cleaner is designed to polish stainless steel surfaces, and a light mist on a microfiber cloth is all you need for most marks. Wipe gently in the direction of the grain, then buff dry.
For heavier fingerprint buildup around handles or door edges, spray a small amount onto the cloth and work it into the area with a circular motion, then finish with a straight wipe along the grain. Avoid using abrasive pads or paper towels, which can leave fine scratches that make future marks harder to remove.
Stainless steel sink cleaning and laundry area use
Stainless steel sinks and laundry appliances benefit from the same routine. After washing dishes or doing laundry, rinse and dry the sink or appliance surface, then apply a light mist of Stainless Cleaner to a cloth and wipe in the direction of the grain. Buff dry to prevent water spots.
In the laundry area, use it on stainless steel washer tops or dryer surfaces after wiping away lint and dust. Because the product is formulated for stainless steel in the kitchen, bath, and laundry area, it fits naturally into a whole-home cleaning routine. Always test on a small, inconspicuous area first if you are unsure about a specific finish.
Product facts for your routine
- Stainless Cleaner: 16.9 oz. peppermint stainless steel cleaner with essential oils and no synthetic fragrance. A sized bottle for regular use on kitchen, bath, and laundry stainless steel, with a mint scent from essential oils rather than synthetic fragrance.

Stainless Cleaner - Stainless Cleaner: Effortlessly polishes stainless steel surfaces in the kitchen, bath, and laundry area. Confirms the intended surfaces and rooms, so you can use it confidently on appliances and sinks in those areas.
Building a simple stainless steel polish routine
A consistent routine keeps stainless steel looking its best. For high-touch areas like refrigerator handles and sink faucets, a quick wipe with Stainless Cleaner every few days can keep fingerprints at bay. For larger appliances, a weekly polish is often enough to maintain shine and remove light smudges.
Always use a soft microfiber cloth and work with the grain. Store the bottle at room temperature and keep it out of reach of children. If you are unsure how your appliance's finish will react, test a small hidden spot first. With a little practice, you will get a streak-free finish that makes your stainless steel surfaces look well cared for.

